Forum Train

The DXDC digital sound decoder supports the 14-step, 28-step and 128-step speed control of the DCC protocol. The
lights of the locomotive are operated by 6 function outputs. Two function outputs of them provide 8
lighting effects including the dimmer, the warning effect, the blinking by speed effect, the random blinking
effect, the strobe light effect and the 3 fixed-frequency blinking effects. By adjusting the CV settings,
more than thousands of lighting effects are provided. As regards the sound features, the decoder
supports up to 64 sound effects and up to 4 mixing sound effects can be heard at the same time. The
light output and the motor circuit are coming with over-load protection to reduce users’ loses caused by
accidents

8 Pin Back-EMF DCC sound decoder

Length: 34mm

Wide: 15mm

Thick: 7mm

Working voltage?12V-26V

Max. input current?1.0A

Function output voltage?16V

Function output max current?300mA

Lighting output max current?300mA

Motor output max. current?500mA

Working temperature?0—80°C

Speaker impedance?100ohm

XTof_vl a écrit:Ce qui serait intéressant, c'est de savoir si ces décodeurs sont des clones de décodeurs reconnus (ESU LokSound par exemple) et peuvent aussi être chargés avec le LokProgrammer (dans le cas d'ESU).

Si ce sont des produits propres à ce fabricant, et qu'il n'y a pas d'outils pour les mettre à jour, c'est déjà moins utile.

Mais prix assez intéressant, s'il en est!